Terms & Conditions

Terms of sale, artwork, use, returns and warranty for goods supplied by Custom SA Branding & Systems.

  • Version 1.22
  • Last updated:

The key points

  • Accepting a quotation, invoice or artwork proof, or making a payment, means you accept these terms. Clause 1.1
  • Production starts once we’ve received full payment and your final artwork approval. Clause 2.1
  • Standard lead time is about 7 working days for orders under 10 units, counted from artwork approval and payment. Clause 3.2
  • Your approved artwork proof is legally binding, so check it carefully. Clause B3.2
  • Report manufacturing defects by email within 24 hours of receiving your goods, with photos, and return them to our factory within 5 working days. Clause 5.2
  • Our products are designed for short-term event and promotional use, not permanent installation. Clause 5.3

This summary helps you find your way around. It doesn’t replace the full terms below.

Clauses that exclude or limit liability, or set time limits for claims, are marked with a red rule. Please read them carefully.

Definitions and scope

Custom SA Branding & Systems is referred to as the “manufacturer” or “CSA”.

Customers, including any third-party intermediary or reseller, are referred to as the “customer”.

These Terms & Conditions govern all quotations, invoices, artwork approvals, manufacturing, delivery, supply, use and warranty of goods supplied by Custom SA Branding & Systems (“CSA”).

By accepting any quotation, invoice, artwork proof or pro-forma invoice, or by making payment to CSA, the customer (including any intermediary or reseller) agrees to be legally bound by these Terms & Conditions.

Part A: Warranty and terms of sale, use and returns

1 Acceptance and contractual effect

1.1

Acceptance of any CSA quotation, invoice, artwork proof (whether signed or approved via email), or payment constitutes full acceptance of these Terms & Conditions.

1.2

No verbal representations, promises or agreements shall be binding unless confirmed in writing by an authorised CSA representative.

1.3

These Terms & Conditions override any customer terms unless expressly agreed in writing by CSA.

2 Payment and ownership

2.1

Production will only commence once:

  • (a) full payment has been received (unless otherwise agreed in writing); and
  • (b) final artwork approval has been received.
2.2

All goods remain the property of CSA until paid for in full.

2.3

CSA reserves the right to withhold production, dispatch or release of goods should payment terms not be met.

2.4

All free artwork or redrawing remains the property of CSA. Source files are not automatically included and may be purchased separately, as quoted.

3 Production time-frames

3.1

Production lead times begin only once artwork approval and payment have been received.

3.2

Standard production lead time for orders under 10 units is approximately 7 working days, unless otherwise stated in writing.

3.3

Lead times for larger quantities or custom projects will be confirmed in writing, based on production capacity, stock availability and the time required for production.

3.4

Rush jobs require written agreement and may incur additional charges.

3.5

No verbal delivery guarantees shall be valid unless confirmed in writing.

3.6

CSA reserves the right to change lead times should we encounter any disruption, or specific product supply shortages, outside our control.

4 Returns and cooling-off period

4.1

In accordance with the South African Consumer Protection Act (CPA), customers may notify CSA in writing (via email) within 5 (five) calendar days of delivery that a problem exists with the product, and include photos of the problem or issue.

4.2

Returned goods must be received back at the CSA factory within 5 (five) working days from the delivery date.

4.3
Important:

CSA does not arrange collection of returned goods and accepts no responsibility for courier or transport costs relating to returns. All return costs are for the customer’s account.

4.4

All returns must be accompanied by an evidence report and pictures.

4.5

On receipt of any return, CSA will conduct an assessment of the products. The assessment report will guide the course of action to be taken by CSA.

4.6
Important:

Returns relating to approved artwork proofs will not be accepted.

5 Warranty

5.1

Manufacturer warranty

CSA provides a carry-in / carry-out warranty strictly limited to manufacturing defects present at the time of supply.

All products are fully inspected and tested before leaving the factory to ensure:

  • correct operation;
  • correct components are included;
  • no manufacturing defects;
  • proper assembly and workmanship;
  • all printing is correct; and
  • the artwork on the product matches the artwork on the approved artwork proof.
5.2
Important:

Reporting defects

  • Any manufacturing defects, faults or damage must be reported by email within 24 hours of receipt of the goods, together with clear supporting photographs and an evidence report.
  • Goods must be returned to the CSA factory within 5 working days for assessment.
  • Failure to notify CSA or return goods within the prescribed period will invalidate any warranty claim.
5.3
Important:

Warranty exclusions

Warranty claims will be excluded or void where damage results from:

  • product used after delivery;
  • wind or weather damage;
  • user negligence or mishandling;
  • incorrect anchoring or fastening;
  • transport or courier damage;
  • improper storage;
  • prolonged or permanent installation; or
  • usage outside intended short-term event purposes.

CSA products are designed primarily for short-term event and promotional use and are not intended as permanent installations, structures or long-term signage solutions.

6 Fair usage and wear and tear

Important:

All products will naturally experience wear and tear over time, particularly when used outdoors and exposed to natural environmental conditions.

Outdoor promotional products are not intended to last indefinitely, and normal wear resulting from reasonable use is excluded from warranty cover.

Customers are required to:

  • take products down overnight;
  • avoid use during severe weather conditions;
  • monitor and maintain products during use;
  • react to changes in the weather: in harsh weather or high winds, the products must not be used; and
  • follow the proper procedure to close up any product, releasing the correct clips or buttons. No claim will be considered if the product was forcefully closed.

CSA accepts no responsibility for damage resulting from non-compliance.

7 Dye-sublimated fabrics and colour variation

Dye-sublimation is the process of infusing colour, logos, wording and imagery into polyester fabric.

Due to the absorbent nature of polyester fabric, colour variations of approximately 15–25% may occur.

Fabric printing differs significantly from lithographic or paper printing, and exact Pantone or CMYK matching cannot be guaranteed.

Should exact colours be required, customers must provide:

  • a physical colour sample; or
  • a colour reference.

Where no reference is supplied, CSA will attempt to match colours as closely as possible but accepts no liability for colour variances.

Printed colour swatches can be supplied on request where specific colours are identified.

8 Fabric types and product intended use

The fabric type used for each product will be specified on the quotation.

Should any variations be required, customers must clearly specify this when placing the order.

For repeat orders, customers are responsible for specifying previous materials if consistency is required.

Lightweight event fabrics such as Airtech are designed for temporary promotional applications and may have limitations under prolonged or adverse weather conditions.

9 Product-specific terms and conditions

9.1

Gazebos and parasols

Gazebos and parasols are manufactured specifically for short-term event and promotional use and are not intended for permanent daily installation or continuous outdoor exposure.

Due to the size and surface area of these products, they must always be securely anchored using the supplied ropes and pegs. Additional weights or suitable securing methods may also be needed. Failure to properly secure the product may result in damage, collapse or injury, for which CSA accepts no liability.

The canopy fabric used on gazebos and parasols is dye-sublimated polyester fabric and is classified as being approximately:

  • 25% water resistant; and
  • 25% UV resistant.

Dye-sublimation and colour fading

Whilst dye-sublimation provides vibrant, high-impact full-colour branding and excellent visual advertising exposure, all dye-sublimated fabrics will naturally fade over time when exposed to sunlight, UV radiation, heat, wind, rain and general outdoor environmental conditions.

The rate of fading depends on factors including:

  • direct sun exposure;
  • UV intensity;
  • geographic location and climate;
  • duration of exposure;
  • weather conditions;
  • frequency of use; and
  • storage and maintenance practices.

It is important to understand that gazebos and parasols are event-specific promotional products and were never intended for permanent outdoor installation or 24/7 use.

As a general guideline:

  • canopies exposed to continuous direct sunlight may begin showing noticeable fading within approximately 4–6 months;
  • harsh African sunlight and prolonged UV exposure may accelerate this process significantly; and
  • darker and more vibrant colours may fade more visibly over time than lighter colours.

Important: Colour fading, UV deterioration, weathering, fabric ageing or environmental wear resulting from normal outdoor exposure is considered fair wear and tear and is specifically excluded from any warranty.

Customers are strongly advised to:

  • take gazebos and parasols down after events;
  • avoid prolonged, unnecessary sun exposure;
  • never leave products erected permanently;
  • store products in a cool, dry environment when not in use; and
  • avoid use during severe weather or high-wind conditions.

Failure to follow these usage guidelines may significantly reduce the lifespan of the product and void any applicable warranty.

9.2

Banner walls

  • Banner walls are lightweight and portable systems.
  • All clips must be released before collapsing the frame.
  • Closing the frame with clips still connected will result in breakage and void the warranty.
  • CSA offers a repair service for damaged frames, subject to an assessment and quotation.
9.3

Pull-up banners

  • All pull-up banners are fully tested before dispatch.
  • Damage caused by dropping, releasing or allowing the spring-loaded mechanism to retract suddenly is considered user negligence and voids the warranty.
9.4

Telescopic, sharkfin and pole systems

  • Intended for short-term event use only.
  • Long-term use exceeding 5 consecutive days, or overnight use, may void the warranty.
  • Ground stakes must not be forced into hard surfaces or bent.
  • No warranty applies to flag wrapping caused by wind conditions.
  • No warranty applies should a pole or component break or snap if used in extreme wind or bad weather conditions.
9.5

Cleaning and care

Dye-sublimated products may be washed delicately in warm water.

CSA accepts no liability for:

  • damage caused by washing methods;
  • dirt accumulation during use; or
  • environmental staining or wear.

10 Repairs

CSA offers a “component replacement” service for any item that may be broken or damaged. The procedure is to return the item to the CSA factory, where we will assess the damage and supply a quotation for the repair.

10.1

Damaged items must be returned to CSA for assessment before repairs commence.

10.2

Repairs must be paid for in full prior to commencement.

10.3
Important:

Repaired items will only be stored for a maximum of 30 days after completion.

10.4
Important:

Items not collected within 30 days will be disposed of at CSA’s discretion.

11 Product descriptions, weights and sizing

CSA reserves the right to determine:

  • product descriptions;
  • weight calculations; and
  • product sizing specifications.

Overall product sizing includes all hardware and structural components, including the ground stake, and not the fabric dimensions only.

12 Limitation of liability

Important:
12.1

CSA shall not be liable for any indirect, consequential, incidental or special damages, including but not limited to:

  • loss of profits;
  • event disruption;
  • loss of business;
  • reputational damage; or
  • third-party claims,

arising from the use of CSA products.

12.2

CSA’s total liability shall not exceed the purchase price of the specific item supplied.

13 Third-party resellers

Resellers and intermediaries are fully responsible for communicating these Terms & Conditions to their customers and remain liable for compliance.

Part B: Artwork policy

Part B sets out our artwork terms. The definitions, scope and Part A above apply to all artwork quotations, proofs and approvals.

B1 Acceptance and contractual effect

Clause 1 of Part A (1.1 to 1.3) applies in full to all artwork quotations, artwork proofs and artwork approvals.

B2 Artwork policy

B2.1

Free basic artwork setup

CSA offers free basic artwork setup on qualifying orders.

Basic artwork setup includes:

  • placement of the supplied logo;
  • adding contact details (phone number, website and/or email address);
  • layout on a plain colour background; and
  • standard sizing and positioning adjustments.

This service is provided at no additional cost.

B2.2

Complimentary revisions

CSA allows up to three (3) basic revisions free of charge.

Basic revisions include:

  • minor size adjustments;
  • minor position changes;
  • plain background colour changes; and
  • swapping supplied contact details.

Any revisions beyond the included three (3) will incur additional charges.

B2.3

Advanced / custom artwork

The following will be considered advanced artwork and will incur additional charges:

  • logo redesign or recreation;
  • vector tracing of low-resolution logos;
  • background removal or complex editing;
  • creative layout design;
  • custom graphics or illustrations;
  • detailed mock-ups or rendering;
  • extensive text formatting or typography work;
  • pattern creation; and
  • any work beyond simple logo and contact detail placement.

Charges will be based on:

  • the complexity of the brief;
  • the time required;
  • the scope of work; and
  • urgency (if applicable).

No advanced artwork will commence without customer approval of the quoted fee.

B3 Artwork file requirements and proofs

B3.1

File requirements

Vector artwork (AI, EPS, SVG, or print-ready PDF exported from professional design software such as Adobe Illustrator or CorelDRAW) is required for optimal large-format print quality.

Low-resolution files (JPEG, PNG, bitmap, TIFF, or artwork embedded in Microsoft Word, Excel, PowerPoint, Canva or similar programs) may require recreation at an additional design fee.

A quotation for artwork recreation will be provided for approval before work commences.

CSA shall not be responsible for:

  • poor print quality;
  • pixelation;
  • colour shifts;
  • scaling issues;
  • resolution loss; or
  • distortion,

resulting from unsuitable artwork supplied by the customer.

B3.2
Important:

Artwork proof approval (legally binding)

An artwork proof will be issued for every order.

Once approved (signed or approved via email), the artwork proof becomes a legally binding contractual document.

Approval confirms acceptance of:

  • spelling;
  • colours;
  • layout;
  • logo placement and proportions;
  • sizing; and
  • all design elements.

CSA accepts no liability for any errors identified after approval. Any reprints required will be charged in full.

B4 Client responsibilities

Customers are responsible for:

  • supplying high-resolution logos and artwork files;
  • ensuring all spelling, contact details and information are correct;
  • reviewing and approving artwork carefully prior to production; and
  • specifying previous fabric or material types for repeat orders if consistency is required.

CSA accepts no responsibility for errors once artwork has been approved.

B5 Payment and ownership

Clauses 2.1 to 2.3 of Part A apply. In addition:

B5.4

All custom artwork remains the property of CSA until full payment has been received.

B5.5

Source files are not automatically included and may be purchased separately.

B6 Production timeframes

Clause 3 of Part A (3.1 to 3.6) applies to all orders that include artwork.

Chat with Custom SA on WhatsApp, 061 610 1949 (opens in a new tab)